News

Pipette Maintenance

​The pipette should be regularly maintained according to the frequency of use, but at least every 3 months, check the pipette for dust and dirt, pay special attention to its mou...

Precautions For Pipettes

This operation for a long time will cause the parts in the pipette to loosen, and in severe cases, the knob for adjusting the scale will be stuck.

Pipette Transfer Method

​Forward pipetting method Press the pipetting lever to the first stop position, then slowly release the button to return to the origin

Pipette Placement

​After using the pipette, press down on the push rod of the tip with your thumb, safely withdraw the tip and adjust its capacity to the marked maximum value, and then hang the p...

Pipette Use

​Make sure the pipette, tip and liquid to be pipetted are at the same temperature

Pipette Assembly Tips

​When using a single-channel pipette, align the nose cone of the adjustable pipette with the mouth of the pipette, and press down gently and vertically to tighten it.

Set The Pipetting Volume

​Adjust the pipette volume control knob to set the pipetting volume.

How A Pipette Works

There are two physical principles of micropipette dispensing: dispensing with an air cushion and dispensing with a positive-moving piston without an air cushion.

The Pipette Dispenses The Solution

​Hold the pipette or pipette upright, the receiver is tilted, the lower end of the tube is close to the inner wall of the receiver, release the index finger, and let the solutio...

Pipette To Adjust Liquid Level

Put the bottom line of the meniscus until it is tangent to the edge of the marking line, and immediately press the nozzle with the index finger.

The Pipette Picks Up The Solution

​Shake the solution to be absorbed, pour a small part of the solution to be absorbed into a small beaker that is washed and dried, use filter paper to absorb the water inside an...

Introduction To Pipette Tips

​Pipette tips are laboratory pipette consumable products.